Swing Beam Shears
Key words:
Swing Beam Shears
Classification:
- Product Description
- Components
- Technical Parameters
-
QC12K Series Servo CNC Cutting Machine
1.rack,knife,vibration to eliminate stress, welding machine, durable.
2.advanced integrated hydraulic system, good reliiability.
3.three-point support rolling guide to eliminate the bearing clearance, to ensure the quality of shear.
4.electric blade gap adjustment, quick and accurate.
5.on the full used of the blade edge on all sides,the increased use of time.
6.shear angle can be electrically adjusted,reducing the amout of shear deformation plate.
7.after the block, rv reducer electric adjudtment, electronic digital display, accurate ang reliable.
The main features
1.german siemens motor can be optional
2.france schneider electric can be optional
3.usa sunny oil pump is optional
4.material pressure cylinder, to ensure you without oil leak trouble
5.the oil cylinder is with mirror finished, also to reduce oil leak trouble
For larger shears the moving blade may be set on an angle or "rocked" in order to shear the material progressively from one side to the other; this angle is referred to as the shear angle. Setting the blade on an angle decreases the amount of force required, but increases the stroke. A 5 degree shear angle decreases the force by about 20%. The amount of energy used is still the same. The moving blade may also be inclined 0.5 to 2.5°, called the rake angle, to keep the material from becoming wedged between the blades. However, raking the blade compromises the squareness of the edge.
The machine consists of a shear table, work-holding device, upper and lower blades, and a gauging device. The shear table is the part of the machinery that the workpiece rests on while being sheared. The work-holding device is used to hold the workpiece in place and keep it from moving or buckling while under stress. The upper and lower blades are the piece of machinery that actually do the cutting, while the gauging device is used to ensure that the workpiece is being cut where it is supposed to be.
-
Machine parts
Working table with ball roller
NC system
Ball screw + linear guide
Back gauge
Electronic system
Blade gap adjustment wheel
Frequency Inverter
Tube connector
Main motor
X-axis Motor
Hydraulic Valve
Oil pump
Machine optional parts
CNC control system
Blade gap adjustment motor
Light curtain in front side or back side
Air cooled
Front support + guide rail
Pneumatic rear support
-
Get a Free Quote
We will contact you within one working day. Please pay attention to your email.
To: Company Name
Related Products
Address: Bowang Industrial Park, Bowang District, Ma'anshan, Anhui
Copyright @ 2024 Anhui Colgar Machinery Manufacturing Co., Ltd. SEO www.300.cn nanjing